66~110kV Dry flexible outdoor termination-Premolded cable terminations-Power cable terminations-Power cable accessories-Products-Angelor (Jiangsu) Intelligent Electric co.,LTD.

66~110kV Dry flexible outdoor termination

Product Descriptions

● Choose high-quality imported liquid silicone rubber as raw material which has the advantages of high strength, high elasticity, corona resistance, leakage resistance and aging resistance.

● It has the characteristics of oil-free, explosion-proof, earthquake-resistant, light weight and maintenance-free.

● The installation is extremely convenient and the installation position is flexible, which can be installed vertically and obliquely.

● The leakage ratio of external insulation is 35mm/kV, and it can be a special product.

● The stress cone at the electric field intensity of the product is covered by an umbrella skirt, which affects the electric field distribution from the outside.

Product introduction: 110kV dry-type outdoor terminal product introduction.pdf

Structure diagram: 110kV dry type outdoor terminal structure diagram.pdf

Product Details

Technical Specifications
Area Of Application
Applicable cable cross-sections:	240~1600 mm²
Max.system voltage:	126 kV
System rated frequency:	50 Hz
Elevation:	≤2000 m
Operation temperature;	-55 ℃~45 ℃
Cable Shield Style	Tape/wire/corrugated Al
Design Data
Height		1500 mm
Weight(excluding cable)		40 kg / 88.18 lbs
Creepage distance		4500 mm
Top seal system		silicone rubber sealing tube
Storage temperature		0 ℃~35 ℃
Installation temperature		5 ℃~35 ℃
Electrical Test
Electrical Type Test (IEC 60840)
Heating cycle voltage	152 kV
Partial discharge test at ambient and elevated temperatures	No detctable discharge exceeding the declared sensitivity (114kV, 3.6pC)
Lighting impulse voltage 1.2 ㎲/50 ㎲	650 kV
Electrical Routine Test (IEC 60840)
AC withstand voltage	190 kV
Partial discharge test	No detctable discharge exceeding the declared sensitivity (114kV, 3.6pC)

上一篇：66~110kV Composite insulation outdoor termination

下一篇：66~110kV GIS termination

Product Recommendation

66~110kV Porcelain insulation outdoor termination
● The product uses high-strength porcelain sleeve which has the advantage of high mechanical strength, good stability, no aging, especially suitable for coastal and natural environment harsh areas.● The product adopts the structure of big and s...
Detail
66~110kV Composite insulation outdoor termination
● Epoxy insulator is covered with silicone rubber umbrella skirt. Flexible composite insulator is filled with high-quality filling fliud. It is suitable for densely populated areas where electrical equipment is concentrated.● The composite insu...
Detail
66~110kV GIS termination
● The whole dry structure is not filled with insulating oil, which overcomes the aging problem of stress cone caused by soaking in insulating oil, and improves the service life of stress cone and avoids leakage in operation.● The surface of str...
Detail
220kV Porcelain insulation outdoor termination
● The product uses high-strength porcelain sleeve which has the advantage of high mechanical strength, good stability, no aging, especially suitable for coastal and natural environment harsh areas.● The product adopts the structure of big and s...
Detail