66~110kV GIS termination-Premolded cable terminations-Power cable terminations-Power cable accessories-Products-Angelor (Jiangsu) Intelligent Electric co.,LTD.

66~110kV GIS termination

Product Descriptions

● The whole dry structure is not filled with insulating oil, which overcomes the aging problem of stress cone caused by soaking in insulating oil, and improves the service life of stress cone and avoids leakage in operation.

● The surface of stress cone is attached to the epoxy resin insulator by a combined spring compaction device, which can keep constant interface pressure and overcomes the relaxation phenomenon caused by material aging of stress cone to ensure the safe operation of terminal.

● The product has the advantages of light weight, small volume, compact structure and convenient installation and maintenance.

● High-voltage metal shield electrode is embedded in epoxy resin insulator. Rubber stress cone adopts imported high-elastic liquid silicone rubber and optimizes the structure shape of stress cone product.

Product introduction: 110kV Dry Insulation GIS Terminal Product Introduction.pdf

Structure diagram: 110kV dry-type insulated GIS terminal (short type) structure diagram.pdf

Structure diagram: 110kV dry-type insulated GIS terminal (long type) structure diagram.pdf

Product Details

Technical Specifications
Area Of Application
Applicable cable cross-sections:	240~1600 mm²
Max.system voltage:	126 kV
System rated frequency:	50 Hz
Elevation:	≤2000 m
Operation temperature;	-55 ℃~45 ℃
Cable Shield Style	Tape/wire/corrugated Al
Design Data
Height		1080±10 mm(short type) 1264±10 mm(long type)
Weight(excluding cable)		55 kg / 121.3 lbs(short type) 65 kg / 143.3 lbs(long type)
Epoxy resin insulator	Material	Epoxy resin
	Withstand pressure	1.0 MPa
Compression device of stress cone		Spring compression
Min.working pressure of SF₆		0.25 MPa
Storage temperature		0 ℃~35 ℃
Installation temperature		5 ℃~35 ℃
Electrical Test
Electrical Type Test (IEC 60840)
Heating cycle voltage	152 kV
Partial discharge test at ambient and elevated temperatures	No detctable discharge exceeding the declared sensitivity (114kV, 3.6pC)
Lighting impulse voltage 1.2 ㎲/50 ㎲	650 kV
Electrical Routine Test (IEC 60840)
AC withstand voltage	190 kV
Partial discharge test	No detctable discharge exceeding the declared sensitivity (114kV, 3.6pC)

上一篇：66~110kV Dry flexible outdoor termination

下一篇：220kV Porcelain insulation outdoor termination

Product Recommendation

66~110kV Porcelain insulation outdoor termination
● The product uses high-strength porcelain sleeve which has the advantage of high mechanical strength, good stability, no aging, especially suitable for coastal and natural environment harsh areas.● The product adopts the structure of big and s...
Detail
66~110kV Composite insulation outdoor termination
● Epoxy insulator is covered with silicone rubber umbrella skirt. Flexible composite insulator is filled with high-quality filling fliud. It is suitable for densely populated areas where electrical equipment is concentrated.● The composite insu...
Detail
66~110kV Dry flexible outdoor termination
● Choose high-quality imported liquid silicone rubber as raw material which has the advantages of high strength, high elasticity, corona resistance, leakage resistance and aging resistance.● It has the characteristics of oil-free, explosion-pro...
Detail
220kV Porcelain insulation outdoor termination
● The product uses high-strength porcelain sleeve which has the advantage of high mechanical strength, good stability, no aging, especially suitable for coastal and natural environment harsh areas.● The product adopts the structure of big and s...
Detail