220kV Porcelain insulation outdoor termination-Premolded cable terminations-Power cable terminations-Power cable accessories-Products-Angelor (Jiangsu) Intelligent Electric co.,LTD.

220kV Porcelain insulation outdoor termination

Product Descriptions

● The product uses high-strength porcelain sleeve which has the advantage of high mechanical strength, good stability, no aging, especially suitable for coastal and natural environment harsh areas.

● The product adopts the structure of big and small umbrella skirt, and the experiment has proved that this structure has excellent pollution resistance.

● It has a good sealing performance to prevent flooding, oil leakage and other possible defects.

● Porcelain insulator comes in two sizes. One specification is 1280mm high and 3150mm creepage distance, which is suitable for Ⅲ-level dirty areas. The other specification is 1400mm high and the creepage distance is 3906mm, which is suitable for Ⅳ-level dirty areas.

Product introduction: 220kV porcelain sleeve outdoor terminal product introduction.pdf

Structure diagram: 220kV porcelain sleeve outdoor terminal structure diagram.pdf

Product Details

Technical Specifications
Area Of Application
Applicable cable cross-sections:	240~2500 mm²
Max.system voltage:	252 kV
System rated frequency:	50 Hz
Elevation:	≤2000 m
Operation temperature;	-55 ℃~45 ℃
Cable Shield Style	Tape/wire/corrugated Al
Design Data
Height		3140±30 mm
Weight(excluding cable)		550 kg / 1212.54 lbs
Composite insulator	Bending moment resistance	≥5000 kN
	Internal withstand pressure	2.4 MPa
	Breakdown pressure	3.5 MPa
Filling fluid(material)		PIB/Gel
Creepage distance		≥8300 mm
Permissible horizontal pull of connecting wire		≥2 kN
Storage temperature		0 ℃~35 ℃
Installation temperature		5 ℃~35 ℃
Electrical Test
Electrical Type Test (IEC 62067)
Heating cycle voltage	254 kV
Partial discharge test at ambient and elevated temperatures	No detctable discharge exceeding the declared sensitivity (191 kV, 3.8pC)
Lighting impulse voltage	±1050 kV
Electrical Routine Test (IEC 62067)
AC withstand voltage (wet,1 min)	460 kV
Partial discharge test	No detctable discharge exceeding the declared sensitivity (191 kV, 3.8pC)

上一篇：66~110kV GIS termination

下一篇：220kV Composite insulation outdoor termination

Product Recommendation

66~110kV Porcelain insulation outdoor termination
● The product uses high-strength porcelain sleeve which has the advantage of high mechanical strength, good stability, no aging, especially suitable for coastal and natural environment harsh areas.● The product adopts the structure of big and s...
Detail
66~110kV Composite insulation outdoor termination
● Epoxy insulator is covered with silicone rubber umbrella skirt. Flexible composite insulator is filled with high-quality filling fliud. It is suitable for densely populated areas where electrical equipment is concentrated.● The composite insu...
Detail
66~110kV Dry flexible outdoor termination
● Choose high-quality imported liquid silicone rubber as raw material which has the advantages of high strength, high elasticity, corona resistance, leakage resistance and aging resistance.● It has the characteristics of oil-free, explosion-pro...
Detail
66~110kV GIS termination
● The whole dry structure is not filled with insulating oil, which overcomes the aging problem of stress cone caused by soaking in insulating oil, and improves the service life of stress cone and avoids leakage in operation.● The surface of str...
Detail